Announcement
Feb. 27, 2022, 10:09 a.m.

بۆ جارا دووێ ئاگەهداریا گشت كومپانیێن بسپۆر د بوارێ دابینكرنا ئامیرێ لابورێن ئەندازیاری دا دکەین ب هەبوونا سەرئێك كێمكرنەكێ بۆ دابینكرنا فرنەكا سۆتنا كونكریتی بۆ كولیژا ئەندازیاری – پشكا شارستانی ل زانكۆیا دهۆك و لدویڤ سالۆخەت و مەرجێن پێشكێشكرنێ ئەوێن ل خوارێ دیاركری:


١. پێدڤیە ئۆفەر ب دینارێ عیراقی بهێتە پێشكێشكرن
٢. دیاركرنا ماوێ دابینكرنێ.
٣. دیاركرنا ژێدەرێ (منشأ) یێ چێكرنا ئامیرەی.
٤. ماوێ دلنیابوون و سەخبێریێ (چمان و صیانە) ئێك سالە.
٥. دویماهیك رۆژ بۆ پێشكێشكرنا ئۆفەران، رۆژا بێنجشەمبی رێكەڤتی ٣/٣/٢٠٢٢


بۆ زانین ئۆفەر دێ ل سەرۆكاتیا زانكۆیا دهۆك – رێڤەبەریا پێداویستی و لابۆرا هێنە وەرگرتن.

The requirements of Electric Furnace

 

  1. Internal Dimension of Rectangular Horizontal Furnace is (depth = 0.4 m, width = 0.4 m, Length = 1.4 m) as shown in Figure below.
  2. Temperature sensor rated up to (1200°C)
  3. Temperature increase rate of 6 or 10°C/min in order to follow up the temperature-time standard curve like ISO834 or JIS A 1304.
  4. Have the data logger.
  5. The furnace door must be opened from the top.
  6. For the inside of the furnace, a good quality (soft) fire brick to be used.
  7. insulated with inswool sheet or cement board between firebrick and metal box and also set it at top of furnace below the top door.
  8. Set two steel rollers inside the furnace to avoid contact of sample with the furnace body.
  9. Set Temperature controller inside control box.
  10. The furnace should have two small openings in order to input Thermocouples K Type wires to be able to measure the temperature of core and surface of specimen.
  11. Furnace should set be on wheels to have a flexibility of moving.
  12. Outer cover furnace body is to be made from water proof Galvanised metal sheet of 3 mm thickness.
  13. Maintenance period.